GLC CONCRETE DISSOLVER

✅ UK manufactured product.

✅ Removes concrete without damaging the underlying surface.

✅ Non-corrosive formula.

✅ Safe on all materials of construction.

Apply with a low-pressure sprayer.

It is essential to do a test area first and to wear the correct PPE, goggles, gloves and overalls. Use the product neat: do not dilute or mix with other products. Spray the product evenly once or twice depending on the concrete thickness. Leave the product to act for 30 minutes to several hours. Repeat the process to achieve the required result. Thoroughly rinse the treated surface using a high-pressure washer.

Do not dilute or mix with other chemicals. For best results, it is essential to use the product when the temperature of the substrates is above 4°C and below 30°C. Apply to dry substrate and avoid applying during heavy rain or in very hot weather.

Surface Applications:

Thin layer of concrete: Apply an even coat of Concrete Dissolver using a low-pressure sprayer and allow 30 minutes to a couple of hours contact time. Thoroughly rinse the treated surface using a high-pressure washer following.

Medium layer of concrete: Apply 2 even coats of Concrete Dissolver, 15 minutes apart using a low-pressure sprayer. Allow 2 to 8 hours contact time. Thoroughly rinse the treated surface using a high-pressure washer.

Thick layer of concrete: Apply 3 even coats of Concrete Dissolver, 15 minutes apart using a low-pressure sprayer. Allow 6 to 12 hours contact time. Thoroughly rinse the treated surface using a high-pressure washer.

This process may need to be carried out more than once or over a couple of days to remove very heavy, concrete contaminated machinery.

GLC Concrete Dissolver can also be used to clean your hand tools and equipment in as little as 15 minutes.

Avoid contact with eyes. In case of contact with eyes, rinse with plenty of water and seek medical advice. Keep locked up and out of reach of children.

Contains: Glycolic Acid (sugar cane derived extract).