- UK manufactured product.
- Removes concrete without damaging the underlying surface.
- Non-corrosive formula.
- Safe on all materials of construction.
£12.00 – £120.00
A UK manufactured premium quality Concrete Remover. GLC Concrete Dissolver is based on green technology. This consists of an organic compound derived from sugar cane. Once synthesised, the product works by attacking and dissolving the glue/portland in the concrete. It turns the concrete into a soft mush without damaging the underlying surface. The amount of time required for this process depends on the thickness of the concrete layer.
Our Concrete Remover removes concrete without damaging painted surfaces or aluminium. Therefore, it is also safe on chrome, rubber or composite materials. As it is a non-corrosive product, all sensitive metals can be cleaned without damage. Our Concrete Dissolver is virtually safe on all materials of construction.
GLC Concrete Dissolver is non-toxic, biodegradable and non-flammable. Additionally, it is also VOC exempt, and complies with all regulatory standards for air quality. It is kind to the environment and contains no Ozone Depleting Compounds.
All prices shown excl. VAT.Available in 205L/1000L IBC, please enquire direct for prices
Apply with a low-pressure sprayer.
It is essential to do a test area first and to wear the correct PPE, goggles, gloves and overalls. Use the product neat: do not dilute or mix with other products. Spray the product evenly once or twice depending on the concrete thickness. Leave the product to act for 30 minutes to several hours. Repeat the process to achieve the required result. Thoroughly rinse the treated surface using a high-pressure washer.
Do not dilute or mix with other chemicals. For best results, it is essential to use the product when the temperature of the substrates is above 4°C and below 30°C. Apply to dry substrate and avoid applying during heavy rain or in very hot weather.
Thin layer of concrete: Apply an even coat of Concrete Dissolver using a low-pressure sprayer and allow 30 minutes to a couple of hours contact time. Thoroughly rinse the treated surface using a high-pressure washer following.
Medium layer of concrete: Apply 2 even coats of Concrete Dissolver, 15 minutes apart using a low-pressure sprayer. Allow 2 to 8 hours contact time. Thoroughly rinse the treated surface using a high-pressure washer.
Thick layer of concrete: Apply 3 even coats of Concrete Dissolver, 15 minutes apart using a low-pressure sprayer. Allow 6 to 12 hours contact time. Thoroughly rinse the treated surface using a high-pressure washer.
This process may need to be carried out more than once or over a couple of days to remove very heavy, concrete contaminated machinery.
GLC Concrete Dissolver can also be used to clean your hand tools and equipment in as little as 15 minutes.
Avoid contact with eyes. In case of contact with eyes, rinse with plenty of water and seek medical advice. Keep locked up and out of reach of children.Download Safety Datasheet
Contains: Glycolic Acid (sugar cane derived extract).
We are using cookies to give you the best experience on our website.
You can find out more about which cookies we are using or switch them off in settings.
Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly necessary cookies should be enabled at all times so that we can save your preferences for cookie settings.
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.
Keeping this cookie enabled helps us to improve our website.